搜索
半导体参数测试仪
产品名称:电镀系统
产品型号:Meco FAP
产品厂商:Besi
欲购买或租赁电镀系统
在线咨询 或拨打24小时电话:0755-88859217

Besi Meco FAP 电镀系统


Meco Flex Antenna Plating System (FAP): a unique cost-effective additive process for RFID antenna manufacturing, Flexible PCB and Copper Clad Laminate (CCL).

Details

The Solution for Tomorrow's Low Cost RFID Antenna Production

Low cost RFID applications are currently in the global spotlight. The market volume is expected to ramp up rapidly when total tag cost drops to only a few cents. Antenna inlays for RFID passive tags are currently made out of etched copper or aluminium and, in some cases, (expensive) conductive ink. Neither production methods meet the market perspective of low cost production of high reliability tags.

Additive Copper Process

Meco has developed an additive copper process for plating low cost antenna inlays. The concept is very simple; select a substrate, print the required antenna design in ink, and then plate copper to the required thickness! The process is completed after plating by pick & placement of a chip and final lamination.

Conductive Ink for Seed Layer Printing

For printing the antenna pattern a conductive ink (e.g. a low cost non-silver ink) is used. You can directly electroplate the required copper on top of the ink layer. The ink layer for the Meco process is only used as a seed layer, the conductive is achieved with the plated copper layer. The Meco FAP therefore only requires a poor conductive ink layer of a few microns acting as a seed layer for the electroplating process. This thin ink layer can be printed in several ways, such a gravure, silk-screen, flexo or by inkjet printing system.

High Product Flexibility/No Change-Over Time!

The system can handle a wide range of different antenna designs (HF, UHF), without any product related parts resulting in zero downtime when changing over from one antenna design to the other! In general, to achieve a good Q-value a copper layer in a range of 3 - 12 micron is required, depending on antenna pattern and frequency band (13.56MHz, UHF).

System Scalability

The Meco FAP system is computer controlled and has a modular setup of plating drums including dereeling and rereeling equipment, web handling system and pre-treatment and post-treatment stations. Due to its modular setup you can start with a small size system to reduce the initial investment, and when the volumes ramp up you simply add a number of plating modules later on.

Additive Copper Process Versus Thick Silver Paste Process

By replacing the expensive thick silver paste for a thin ink seedlayer with an cheap copper plated layer the total production cost will drop dramatically and functionallity becomes even better (read range).

Additive Copper Process Versus Etching Process

First, waste reduction (no etching) and secondly, a significant reduction of process steps resulting in inlay cost of only a few cents!

Substrate width 330 mm 430 mm 650 mm
Number of plating drums 4 4 / 8 / 12 / 16 4 / 8 / 12 / 16
Web speed 0.5 - 2 m/min 0.5 - 12 m/min 0.5 - 12 m/min
Antenna design HF / UHF HF / UHF HF / UHF

 

General Input Requirements

  • Substrate material: PET, PVC or coated paper
  • Substrate thickness: 23 - 150 micron
  • Surface resistance of seed layer: < 300 mOhm/square
  • Strap plating option for HF antenna. This option allows plating on both sides of the substrate in one pass
  • For FAP 330 Ecoline: close loop rinsing option. This makes waste water treatment no longer necessary

您的姓名:
*
公司名称:
联络电话:
*
联系地址:
E-mail:
*
验证码:
看不清?点击更换
咨询内容:
*